Pillow Block Bearings

Contact Now

Pillow block bearing units provide stability and self-alignment for many different applications. Adjustment of a misaligned shaft can occur in any direction and allows centering and alignment without distorting seals. Pillow block bearing units include a hollow set screw for easy and firm attachment on a shaft and a one-piece housing for structural strength. Grease nipples and holes supply lubricating grease to the bearing and maintain the flow of grease to balls and raceways. Rubber seals located between the inner and outer rings prevent lubricants from leaking and protect against contaminants.Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications.Check out our selection of high quality pillow block bearings listed below. We are always updating and adding sizes and styles. So be sure to refer to this page often.

Bearing Number	Bore Dia	Outer DIa	Width	Size
3.438 Inch \| 87.325 Millimeter x 5.141 Inch \| 130.581 Millimeter x 3.75 Inch \| 95.25 Millimeter REXNORD MEP6307 Pillow Block Bearings	1.15	0.06 in	0.0766	3.0312 in
3.688 Inch \| 93.675 Millimeter x 5.969 Inch \| 151.613 Millimeter x 4.25 Inch \| 107.95 Millimeter REXNORD MEP6311F Pillow Block Bearings	32 mm	150 mm	-20 °C	55 mm
3.188 Inch \| 80.975 Millimeter x 5.141 Inch \| 130.581 Millimeter x 3.75 Inch \| 95.25 Millimeter REXNORD MEP6303 Pillow Block Bearings	6	Steel	14 Days	Flange Type
2.188 Inch \| 55.575 Millimeter x 3.5 Inch \| 88.9 Millimeter x 2.5 Inch \| 63.5 Millimeter REXNORD MEP3203 Pillow Block Bearings	Presence	With seal	Non-Separable Type	No
1.438 Inch \| 36.525 Millimeter x 2.922 Inch \| 74.219 Millimeter x 1.875 Inch \| 47.63 Millimeter REXNORD MEP3107 Pillow Block Bearings	6	6207	T-Shaped	Deep Groove Ball Bea
2.25 Inch \| 57.15 Millimeter x 2.362 Inch \| 60 Millimeter x 3.15 Inch \| 80 Millimeter TIMKEN LSE204BXHSAFQAATL Pillow Block Bearings	Single Row	No	No	No
3.938 Inch \| 100.025 Millimeter x 5.188 Inch \| 131.775 Millimeter x 4.25 Inch \| 107.95 Millimeter REXNORD MEP2315F Pillow Block Bearings	124.5 mm	68 mm	30 mm	R1/8"
3 Inch \| 76.2 Millimeter x 4 Inch \| 101.6 Millimeter x 3.125 Inch \| 79.38 Millimeter REXNORD MEP230005 Pillow Block Bearings	3530	Ball	6	8
3.438 Inch \| 87.325 Millimeter x 4.375 Inch \| 111.13 Millimeter x 3.75 Inch \| 95.25 Millimeter REXNORD MEP2307 Pillow Block Bearings	33	Yes (with retaining	623	Available
3.688 Inch \| 93.675 Millimeter x 5.188 Inch \| 131.775 Millimeter x 4.25 Inch \| 107.95 Millimeter REXNORD MEP2311F Pillow Block Bearings	22 Nm	3.55 kg	45 mm	25 mm
2.938 Inch \| 74.625 Millimeter x 4 Inch \| 101.6 Millimeter x 3.125 Inch \| 79.38 Millimeter REXNORD MEP2215C Pillow Block Bearings	Insert Bearing Unit	Bearing Steel	SH33M	Used for Light load
3.5 Inch \| 88.9 Millimeter x 4.375 Inch \| 111.13 Millimeter x 3.75 Inch \| 95.25 Millimeter REXNORD MEP2308F Pillow Block Bearings	100 °C	236 mm	20mm	-20 °C